KLANGWERT i60D PoE
KLANGWERT i60 D PoE – Amplifier with Dante®
The KlANGWERT i 60 D PoE amplifier impresses with its minimal size and its inner values. It’s a PoE + amplifier with an internal Sharc 300 Mhz DSP and a Power of 2 x 30W. The input signal is simply connected with a network CAT cable via Dante / AES67 directly to the KlANGWERT i 60 D PoE. Alternatively, 2 channels of analog audio can be connected. Power is supplied via PoE+. This means that installations with very long cable runs can be carried out easily and inexpensively. The control and monitoring takes place via an IP-based network with the help of the PAN C software. All active AIMLINE / KLANGWERT digital systems can therefore be controlled via just one software interface.
|Audio Inputs:||2 channels Dante®
2 channels analog
|Amplifer:||Class-D 2 x 30 W|
external power supply 24V optional
|DSP:||96 kHz / 40 bit 1,8 ms latency|
|DSP functions:||24 presets switchable via GPIO UDP, 10 Band IIR
Filter, FIR Filter, dynamic EQ, limiter, gain, delay,
status display surveillance,
|Control:||IP basiertes Netzwerk,
|External control:||UDP commands, GPIO|
|Enclosure:||Sheet steel, 4 fastening straps|
|Dimensions:||W x D x H: 120 x 162 x 26 mm|
Are you planning a project where maximum speech intelligibility or balanced musical sound is required? We are happy to support you free of charge and without obligation with our many years of experience from more than 1,000 successfully implemented projects.
Please send us your product inquiry.